How To Setup Raid 5 Windows 10

MegaRAID Storage Manager software enables you to configure, monitor, and maintain storage configurations on LSI SAS controllers. The MegaRAID Storage Manager graphical user interface (GUI) makes it easy for you to create and manage storage configurations. Supported systems.

Configuring RAID 5 and 10 using MegaRAID Storage Managing director
How to create RAID 5, 6 and 10 on RX300 S5

This outlines the steps in configuring RAID on Fujitsu server using the local drives.

Step 1: Power on the Fujitsu server and printing command H while booting
Step 2: this volition work y'all through the configuration process and prompt you with the Adaptor Selection window
– Select '"Adaptor No and Type Radio push and click on start"

Step 3: Now select "configuration magician" to create and configure the RAID

Step four: A New Configuration window pops up
Hither select the new configuration to create your RAID configuration.
Notation: This as well clears the existing configuration and click on Adjacent.

Step 5: At present select "yes" to clear the configuration
Footstep half dozen: And then select Manual Configuration and select "Redundancy when possible" as well and click on Next

Step 7: Now you are prompted with the "Bulldoze Group Definition Window"

Note: for RAID 0, 1, 5 and vi RAID Configuration,
— You can select ALL all the drives by property down the
the control key and clicking on all drives
— Now click on Add to Assortment and
— Click on "Accept DG" and click on Next

or

For RAID 10 Configuration
You will probably have to create ii "Drive Groups" from the available drives to
"Drive Group 0" and
—- The other two drives to "Bulldoze group 1" and
—- Click on "Have DG" and click on next

Step 8): Yous are prompted with the Span Definition Window,

Note: for RAID 0, i, 5 and vi RAID Configuration
— this configuration, you would have to select only one "Bulldoze Group" to
— Click on Add to Span and click on next

Note: for RAID 10 Configuration
— For this configuration, you would have to add together all by selecting one example at a fourth dimension. Ensure to add together all to the Span Window
(Select All the "Drive Group") and
— Click on Add to SPAN and click on next

Step 9: Now you are prompted with the virtual drive definition window where you have to
select the raid level you lot desire.

Annotation: Y'all will take to manually enter select size "TAB" as information technology can have a size different from
your desired RAID Size.

–Click on Accept and Click on Next and

Step 10: A configuration preview window is prompted,
– Click on Accept and save the configuration.

Finally click on habitation, exit and reboot.

Relevant links: http://virtualcloudzz.blogspot.de/2013/08/fujitsu-server-raid-configuration-steps.html

Source: https://techdirectarchive.com/2016/11/02/configuring-raid-5-and-10-using-megaraid-storage-manager/

Posted by: smithcomene.blogspot.com

Share this post